Fritzing Parts – Second Set

This is the second set of Fritzing parts that I’ve made. The first set of parts, along with details about Fritzing and about part creation, can be found here. As with the previous set, these are generally parts that I’ve needed for my own projects (with the exception of requests that others have made (#1, #6, and #9)).

 

The group of Fritzing parts.

The group of Fritzing parts.

 

The group of Fritzing parts, numbered.

The group of Fritzing parts, numbered.

 

The parts are as follows:

  1. HMC5883L Breakout Board
  2. ML8511 Breakout Board
  3. 5V Heartbeat Sensor
  4. YF-S201 Water Flowmeter
  5. ZS-042 DS3231 RTC Module
  6. HX711 Weight Sensor Module
  7. LC Studio SD Card Module
  8. Tilt Sensor
  9. MP1584EN Power Regulator Board
  10. FT232RL USB to Serial Adapter

 

Detail of the ML8511 Board.

Detail of the ML8511 Board.

 

The parts will be released via the Fritzing parts repository (code.google.com/p/fritzing/issues/detail?id=2753). Links will be added to the list above.

 

If you’d like to make a request for the next set, please leave the following details in the comment section below:

  1. The name of the board/module
  2. The outside dimensions in millimeters
  3. Details about each pin (i.e. name — e.g. VCC, GND, SDA)
  4. An image of it at a reasonable resolution (as close to parallel to the image plane as possible)

44 Responses

  1. Jon Dye July 22, 2015 / 12:51 pm

    I’m after a copy of your ZS-042 DS3231 RTC Module part, any idea when you will release it?

      • Jon Dye August 1, 2015 / 6:07 am

        That’s excellent. Thanks for your work, it’s great quality.

        • Richard August 1, 2015 / 6:43 pm

          Thank you. I’m happy to hear you liked the part.

          -Richard

      • Chris Ian Fiel October 8, 2015 / 5:36 am

        Hello Richard,

        Great work! I have an issue finding this part YF-S201 Water Flowmeter . Where can I download the fritzing parts for this.

        Cheers,
        Chris

  2. Slavko August 4, 2015 / 12:57 pm

    Nice parts, will be published somewhere, please?

    • Slavko August 4, 2015 / 2:06 pm

      I think these unpublished, of course 😉

    • Richard August 5, 2015 / 7:14 am

      Hello,

      They are in the process of being published. I usually make the breadboard SVGs first (since I personally only need those for my projects) and eventually do the other two SVGs. That said, if someone wants a particular part, I’ll make the other two SVGs (PCB and schematic) and (endeavor to) release it right away. Are there certain parts that you’re interested in? If so, I can prioritize the release of those parts. If it’s 2-3 parts that you’re interested in, I’d likely finish releasing them by the end of next week. Please let me know.

      -Richard

  3. Antony Samuel August 9, 2015 / 10:15 pm

    These are phenomenal! Great Work!

    Could I get a copy of the LC Studio SD Card Reader?

    Thanks!

    • Richard August 10, 2015 / 5:58 pm

      Hello,

      Thanks. I’ll have the part uploaded in the next day or so.

      -Richard

    • Richard August 16, 2015 / 2:39 am

      Hello again,

      Sorry for the delay – I’ve updated the list above with the link to the requested part.

      If there are any issues with the part, please let me know.

      I hope the part is useful to you.

      -Richard

  4. Gaetan November 4, 2015 / 2:22 pm

    Hi, did you release the flow sensor part? (the YF-S201 Water Flowmeter)
    I would be very grateful!

    • Richard November 7, 2015 / 9:38 am

      Hello Gaetan,

      Sorry for the delay – your comment somehow found itself in the spam folder.

      I have not released the YF-S201 Fritzing part yet (it isn’t a complete part, as I only use the breadboard view for my projects). When I do (finish it and) release it, I will reply to your comment to notify you.

      -Richard

  5. Gaetan November 4, 2015 / 6:56 pm

    Hi, Do you know if you have released the YF-S201 Water Flowmeter?

    It would be very useful as it is nowhere on the web!

    Thanks for your help!

  6. Frank January 27, 2016 / 11:11 pm

    Any update on the flow meter? It would save me a lot of time.

    Thanks!

    • Richard February 3, 2016 / 5:56 am

      Hello Frank,

      Thank you for your comment. I’m hoping to have that part done this weekend.

      -Richard

    • Richard February 10, 2016 / 8:24 am

      Hello Frank,

      Apologies for the delay – there were some issues importing the SVG into Fritzing. Anyhow, a link to the part has been added to the post. Please let me know if there are any issues.

      -Richard

  7. Taco February 7, 2016 / 11:52 am

    Hi Richard,

    The repository seems to be moved from google to github. So the links wont work anymore. I’m inable to find the fritzing parts in the new location. It would be great id you could help me to the HX711 Weight Sensor Module and the LC Studio SD Card Module.

    Best regards,
    Taco

    • Richard February 7, 2016 / 9:05 pm

      Hello Taco,

      Thanks for the comment. I’ve updated the links to the parts. Please let me know if there are any issues.

      -Richard

      • Taco February 8, 2016 / 8:24 am

        Hello Richard,

        Thanks a lot. The links work and the parts look great!

        Regards, Taco

        • Richard February 8, 2016 / 8:56 am

          Hello Taco,

          Thank you. I’m happy to hear you like the parts.

          -Richard

          • Robby July 18, 2016 / 6:17 am

            Hello Richard,

            I guess link for HX711 modul is broken, i can`t download it. Thanks before.

          • Richard July 18, 2016 / 7:03 am

            Hello Robby,

            Thank you for your comment. The part is still available and the link is working for me.

            -Richard

  8. Axel February 7, 2016 / 4:35 pm

    Hi Richard! Great work! Unfortunately, all of your links are redirected to github.com/fritzing. and I was unable to find your part libraries there. Since I am desperately looking for a DS3231 fritzing part, I’d be very happy if you could point to a/the new location. Many thanks in advance, Axel

    • Richard February 7, 2016 / 9:08 pm

      Hello Axel,

      Thank you for your comment. I’ve updated the links to the parts. Please let me know if there are any issues.

      -Richard

      • Axel February 8, 2016 / 1:57 pm

        Great! Many thanks! :-))))

        • Richard February 8, 2016 / 9:32 pm

          Hello Axel,

          Thank you. I hope the parts are useful to you.

          -Richard

      • Prajay Basu March 13, 2016 / 9:50 pm

        Can you link me to the ML8511 part ? You haven’t linked it yet and I also cannot find it in the parts repo.
        Great work though.

        • Richard April 15, 2016 / 1:29 am

          Hello Prajay,

          My apologies for the delay. The post has been updated with a link to the requested part. Please let me know if there are any issues with it.

          -Richard

  9. christoph May 24, 2016 / 9:20 am

    Hi Richard,
    very nice parts. Can you provide a link for the MP1584EN fritzing part (or at least the svg so i have a starting point to try to build a part in Fritzing myself). Thanks.

    • Richard May 25, 2016 / 3:58 am

      Hello Christoph,

      Thank you for your comment. The post has been updated with a link to the requested part. Please let me know if there are any issues with it.

      -Richard

      • christoph May 25, 2016 / 8:09 am

        Thank you, Richard. Looks great

        • Richard May 25, 2016 / 6:50 pm

          Hello Christoph,

          That’s good to hear. Thank you.

          -Richard

  10. Robby July 18, 2016 / 7:39 am

    Hi Richard it`s me again,

    but when i download it (HX711), the browser just showing ANSI encoded text file. Can you send it to my e-mail ?

    this is my e-mail: [removed].

    Thanks again.

    • Richard July 18, 2016 / 8:52 am

      Hello Robby,

      Can you try right-clicking on the link and saving the file?

      -Richard

      • Robby July 18, 2016 / 9:59 am

        Oh, it’s work. I don’t think about it, Thank you so much Richard.

        • Richard July 18, 2016 / 5:38 pm

          Hello Robby,

          Excellent. Happy to hear it. I hope you find the part useful.

          -Richard

  11. Tony September 10, 2016 / 3:35 pm

    Hi there! Thanks very much for creating these. I’ve still to get my head full around the parts editor and the LC Studio SD card module was exactly what I was looking for!

    • Richard September 15, 2016 / 9:06 pm

      Hello Tony,

      Thank you for your kind comment. I’m happy to hear you found the part you were looking for.

      -Richard

  12. Michael September 15, 2016 / 4:45 pm

    Can you post the current link, the google one doesn’t work anymore.

    • Richard September 15, 2016 / 8:56 pm

      Hello Michael,

      Thank you for your comment. The parts are still available and the links are working for me. Can you try right-clicking on a link and saving the file?

      -Richard

  13. MartinFouth May 1, 2018 / 4:38 pm

    Very good art! Thx 🙂

    • Richard May 3, 2018 / 8:42 pm

      Hello Martin,

      Thank you for your comment. I hope you find the parts useful.

      -Richard

Leave a Reply to Taco Cancel reply

Your email address will not be published. Required fields are marked *