Fritzing Parts – Fifth Set

To mark the occasion of 10,000 downloads of parts from the previous four sets, I’ve made a fifth set of Fritzing parts. The first set of parts, along with some details about Fritzing and about part creation, can be found here. All sets can be found under the ‘fritzing’ tag here. As with the previous sets, these are generally parts that I’ve needed for my own projects.

The group of Fritzing parts.

The group of Fritzing parts.

 

The group of Fritzing parts, numbered.

The group of Fritzing parts, numbered.

The parts are as follows:

  1. YL-83 Rain Sensor (Control Board | Detection Board)
  2. SIM800L GSM/GPRS Module
  3. LIDAR-Lite v2
  4. ACS712 Current Sensor Module
  5. Breadboard (25 pin)
  6. BMP280 Breakout Board
  7. BH1750 Breakout Board (GY-302)
  8. 2-Channel 5V Power Relay Module
  9. HB-100 Microwave Sensor Module
  10. 4-Channel 5V Power Relay Module

Since the Fritzing parts repository (code.google.com/p/fritzing/issues/detail?id=2753) is no longer available for sharing parts, they will be posted here instead.   If you’d like to make a request for the next set, please leave the following details in the comment section below:

  1. The name of the board/module
  2. The outside dimensions in millimeters
  3. Details about each pin (i.e. name — e.g. VCC, GND, SDA)
  4. An image of it at a reasonable resolution (and as close to parallel to the image plane as possible)
facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

25 Responses

  1. Mike July 4, 2016 / 11:50 am

    Hello Richard, could you make the 5V power relay available for download? It would really help my project!

    • Richard July 4, 2016 / 7:10 pm

      Hello Mike,

      Thank you for your comment. Which 5V power relay are you interested in?

      -Richard

  2. Mike July 5, 2016 / 12:13 pm

    Hello Richard,

    The 4-way (number 10). There is a (less good looking) one online but it doesn’t come with a schematic view, which is more important for me than the breadboard view..

    Mike 🙂

    • Richard July 8, 2016 / 9:29 am

      Hello Mike,

      The post has been updated with a link to the requested part. Please let me know if you have any problems with it.

      -Richard

  3. Mike August 9, 2016 / 5:28 am

    Hey Richard, these are top notch part designs. Could you post the BMP280 Breakout Board part? It would help with our weather station project. Thank you.

    • Richard August 11, 2016 / 1:12 am

      Hello Mike,

      Thank you for your comment. I’ve updated the post with a link to the requested part. Please let me know if there are any issues with the part.

      -Richard

  4. Sachin September 3, 2016 / 4:29 pm

    Thank you so much Richard for such a wonderful parts set

    • Richard September 4, 2016 / 6:22 pm

      Hello Sachin,

      Thank you for your kind comment. I hope you find the parts useful.

      -Richard

  5. Stefano October 18, 2016 / 9:06 pm

    Hello Richard, would you please post the board number 8 (2-Channel 5V Power Relay Module)? It would be perfect for my next project.
    Thank you.

    • Richard October 26, 2016 / 9:22 am

      Hello Stefano,

      The post has been updated with a link to the requested part. Please let me know if you have any problems with it.

      -Richard

      (My apologies for the delay in responding – your comment was in the spam folder.)

      • Stefano October 26, 2016 / 1:24 pm

        Thank you very much. I’m using (and testing) it asap. I owe you.

        • Richard October 26, 2016 / 9:20 pm

          Hello Stefano,

          Thank you for your comment. I hope you find the parts useful.

          -Richard

  6. Frank November 15, 2016 / 7:35 am

    Hi! Thanks for the great work.
    It would be nice, if ACS712 (4.) was also available for download.

    • Richard December 20, 2016 / 1:32 am

      Hello Frank,

      The post has been updated with a link to the requested part. Please let me know if you have any problems with it.

      -Richard

      (My apologies for the delay in responding – your comment was in the spam folder.)

  7. Sebas November 23, 2016 / 4:55 am

    Hello Richard,

    Would it be possible for you to add a link to the HB-100 Microwave Sensor Module (#9)?

    -Sebas

    • Richard December 20, 2016 / 1:38 am

      Hello Sebas,

      The post has been updated with a link to the requested part. Please let me know if you have any problems with it.

      -Richard

      (My apologies for the delay in responding – your comment was in the spam folder.)

  8. Fatima January 26, 2017 / 11:55 pm

    Hello Richard,
    Thanks for sharing these parts. I’m looking for the conversion TTL / RS485 à MAX485, can u please post it? i spent lot of time searching for it :/
    thanks!

    • Richard January 27, 2017 / 12:07 am

      Hello Fatima,

      Thank you for your comment. I will add that part to the next batch.

      -Richard

  9. J June 16, 2017 / 3:42 pm

    Great site! I’ve been looking for a long time for a 4 channel relay board. Keep up the good work

    • Richard January 26, 2018 / 1:04 am

      Hello J,

      Thank you for your comment. I hope you find the parts useful.

      -Richard

  10. Lukas October 23, 2017 / 6:57 pm

    Thanks a lot pal

  11. Dejan December 1, 2017 / 10:51 pm

    Hi,
    I am interested in bmp280 part, but when i click on it, it takes me to a page with some characters and i am not sure how to use it. It doesn’t start download, if it have to start it at all.

    Help would be nice.

    • Richard January 25, 2018 / 12:17 am

      Hello Dejan,

      Thank you for your comment. Can you try right-clicking on the link and saving the file? That has worked for others.

      -Richard

  12. maram January 6, 2018 / 5:10 pm

    how can I download this set?

    • Richard January 25, 2018 / 12:09 am

      Hello Maram,

      The parts are linked in the list in the post above.

      -Richard

Leave a Reply

Your email address will not be published. Required fields are marked *