This is the eighth set of Fritzing parts that I’ve made. The first set of parts, along with details about Fritzing and about part creation, can be found here. All sets can be found under the ‘fritzing’ tag here. As with the previous sets, these are generally parts that I’ve needed for my own projects.
The parts are as follows:
- Mini USB Breadboard Power Supply Module
- WS2811 RGB LED Breakout
- INA219 Bi-directional Current Sensor Breakout
- Waveshare 1.54in ePaper Display
- ESP8266 WiFi Power Relay Module
- DM Pro Mini Strong
- BX120-50AA Concrete Strain Gauge
- MAX30102 Oximeter
- 16 Channel Power Relay
- NE555 DC 12V Power Relay Module
Since the Fritzing parts repository (code.google.com/p/fritzing/issues/detail?id=2753) is no longer available for sharing parts, they will be posted here instead. If you’d like to make a request for the next set, please leave the following details in the comment section below:
- The name of the board/module
- The outside dimensions in millimeters
- Details about each pin (i.e. name — e.g. VCC, GND, SDA)
- An image of it at a reasonable resolution (and as close to parallel to the image plane as possible)
Absolutely love the graphics you do on these parts. Was surprised you had made one for the RCWL-0516 (which is something I’m now playing around with in my projects).
Something I’ve noticed. I can’t find anyone having done a fritzing part for the 5-way tactile switch that can be seen on the sparkfun website. They RETIRED the part, but it can still be bought on ebay (where I’ve bought many). Sparkfun never did a fzpz for it. Can you help? I always lack this part on my fritzing diagrams.
You can see pictures of the part at: https://www.sparkfun.com/products/retired/11187
I’m sure this will help for the measurements: https://cdn.sparkfun.com/datasheets/BreakoutBoards/5-Way_Tactile_Switch_BOB_mechanical_v10.pdf
Hello Paul,
Thank you for your comment (and apologies for the delay – I don’t always get notifications for comments). Anyhow, I have added the part to the list for the next set.
-Richard
Hello Paul,
Here’s the part that you requested: https://goo.gl/m7Rsef
Let me know if there are any issues. Thanks.
-Richard
The measurements of the 5-Way Tactile Switch is 22mm x 20m. A great picture of the board can be found at: https://cdn.sparkfun.com//assets/parts/6/7/2/4/11187-02a.jpg
Hi Richard, do you by any chance have the module for the Max485?, I am currently doing a project involving it, and I can’t seem to find it anywhere. Anyway, I would like to know if you have it or something remotely similar.
Hello Elizabeth,
Apologies for the delay – I don’t always get notifications for comments. I don’t believe I have that part. I will add it to the list for the next set of parts that I make.
-Richard
hi!
pretty good job
are you uploading these components in any public repository (github)? Because you state “…they will be posted here instead” but I can’t find any link… :'(
regards
Hello Michael,
Thank you for your comment. The complete parts are posted here. In general, I just make the breadboard view, as that is all that I need for my own projects. If you need a particular part, I can post a complete one (that is, finishing the other two views).
-Richard
Can you make this 4*4 RGB Matrix Module?
https://goo.gl/9AZdbH
1) WS2812B 4*4 Bit RGB LED Full Color Driver 16-Bit Module
2) 30 x 30 x 3 mm
3) Left Side = GND | VCC | DATA IN | GND
Right Side = GND | VCC | DATA OUT | GND
4) Front Image: https://img.dxcdn.com/productimages/sku_392775_1.jpg
Rear Image: https://img.dxcdn.com/productimages/sku_392775_2.jpg
Hello David,
Thank you for your comment. I’ve added the part to the list for the tenth set.
-Richard
I’m so pleased to have found your site! Quite an eclectic mix of topics, but for me the fritzing sets are awesome!
I’m starting to use an analog ultrasonic sensor – US_016 – but can’t find a part for it at all. I was going to dabble with the parts editor, using the HC-SR04 as a basis, but the instructions for the new parts editor are not great for someone new to SVG and fritzing such as myself. Any chance you could add it to the wishlist for the next set please? Technical details are here https://uge-one.com/analog-output-ultrasonic-sensor-us-016.html
Hello Chris,
Thank you for your comment. I’ve added the part to the list for the tenth set.
-Richard
Thanks so much
How to download it?
Hello Eigou,
Thank you for your comment. Is there a particular part that you are most interested in? (Note: I usually just make the breadboard view, as that is all that I need for my own projects, but I can make a complete part for you.)
-Richard