This is the second set of Fritzing parts that I’ve made. The first set of parts, along with details about Fritzing and about part creation, can be found here. As with the previous set, these are generally parts that I’ve needed for my own projects (with the exception of requests that others have made (#1, #6, and #9)).
The group of Fritzing parts.
The group of Fritzing parts, numbered.
The parts are as follows:
- HMC5883L Breakout Board
- ML8511 Breakout Board
- 5V Heartbeat Sensor
- YF-S201 Water Flowmeter
- ZS-042 DS3231 RTC Module
- HX711 Weight Sensor Module
- LC Studio SD Card Module
- Tilt Sensor
- MP1584EN Power Regulator Board
- FT232RL USB to Serial Adapter
Detail of the ML8511 Board.
The parts will be released via the Fritzing parts repository (code.google.com/p/fritzing/issues/detail?id=2753). Links will be added to the list above.
If you’d like to make a request for the next set, please leave the following details in the comment section below:
- The name of the board/module
- The outside dimensions in millimeters
- Details about each pin (i.e. name — e.g. VCC, GND, SDA)
- An image of it at a reasonable resolution (as close to parallel to the image plane as possible)
I’m after a copy of your ZS-042 DS3231 RTC Module part, any idea when you will release it?
Hello,
Sorry for the delay. The part can be found here: https://code.google.com/p/fritzing/issues/detail?id=2753#c227
If there are any issues with the part, please let me know.
I hope the part is useful to you.
-Richard
That’s excellent. Thanks for your work, it’s great quality.
Thank you. I’m happy to hear you liked the part.
-Richard
Hello Richard,
Great work! I have an issue finding this part YF-S201 Water Flowmeter . Where can I download the fritzing parts for this.
Cheers,
Chris
Nice parts, will be published somewhere, please?
I think these unpublished, of course
Hello,
They are in the process of being published. I usually make the breadboard SVGs first (since I personally only need those for my projects) and eventually do the other two SVGs. That said, if someone wants a particular part, I’ll make the other two SVGs (PCB and schematic) and (endeavor to) release it right away. Are there certain parts that you’re interested in? If so, I can prioritize the release of those parts. If it’s 2-3 parts that you’re interested in, I’d likely finish releasing them by the end of next week. Please let me know.
-Richard
These are phenomenal! Great Work!
Could I get a copy of the LC Studio SD Card Reader?
Thanks!
Hello,
Thanks. I’ll have the part uploaded in the next day or so.
-Richard
Hello again,
Sorry for the delay – I’ve updated the list above with the link to the requested part.
If there are any issues with the part, please let me know.
I hope the part is useful to you.
-Richard
Hi, did you release the flow sensor part? (the YF-S201 Water Flowmeter)
I would be very grateful!
Hello Gaetan,
Sorry for the delay – your comment somehow found itself in the spam folder.
I have not released the YF-S201 Fritzing part yet (it isn’t a complete part, as I only use the breadboard view for my projects). When I do (finish it and) release it, I will reply to your comment to notify you.
-Richard
Hi, Do you know if you have released the YF-S201 Water Flowmeter?
It would be very useful as it is nowhere on the web!
Thanks for your help!
Any update on the flow meter? It would save me a lot of time.
Thanks!
Hello Frank,
Thank you for your comment. I’m hoping to have that part done this weekend.
-Richard
Hello Frank,
Apologies for the delay – there were some issues importing the SVG into Fritzing. Anyhow, a link to the part has been added to the post. Please let me know if there are any issues.
-Richard
Hi Richard,
The repository seems to be moved from google to github. So the links wont work anymore. I’m inable to find the fritzing parts in the new location. It would be great id you could help me to the HX711 Weight Sensor Module and the LC Studio SD Card Module.
Best regards,
Taco
Hello Taco,
Thanks for the comment. I’ve updated the links to the parts. Please let me know if there are any issues.
-Richard
Hello Richard,
Thanks a lot. The links work and the parts look great!
Regards, Taco
Hello Taco,
Thank you. I’m happy to hear you like the parts.
-Richard
Hello Richard,
I guess link for HX711 modul is broken, i can`t download it. Thanks before.
Hello Robby,
Thank you for your comment. The part is still available and the link is working for me.
-Richard
Hi Richard! Great work! Unfortunately, all of your links are redirected to github.com/fritzing. and I was unable to find your part libraries there. Since I am desperately looking for a DS3231 fritzing part, I’d be very happy if you could point to a/the new location. Many thanks in advance, Axel
Hello Axel,
Thank you for your comment. I’ve updated the links to the parts. Please let me know if there are any issues.
-Richard
Great! Many thanks! :-))))
Hello Axel,
Thank you. I hope the parts are useful to you.
-Richard
Can you link me to the ML8511 part ? You haven’t linked it yet and I also cannot find it in the parts repo.
Great work though.
Hello Prajay,
My apologies for the delay. The post has been updated with a link to the requested part. Please let me know if there are any issues with it.
-Richard
Hi Richard,
very nice parts. Can you provide a link for the MP1584EN fritzing part (or at least the svg so i have a starting point to try to build a part in Fritzing myself). Thanks.
Hello Christoph,
Thank you for your comment. The post has been updated with a link to the requested part. Please let me know if there are any issues with it.
-Richard
Thank you, Richard. Looks great
Hello Christoph,
That’s good to hear. Thank you.
-Richard
Hi Richard it`s me again,
but when i download it (HX711), the browser just showing ANSI encoded text file. Can you send it to my e-mail ?
this is my e-mail: [removed].
Thanks again.
Hello Robby,
Can you try right-clicking on the link and saving the file?
-Richard
Oh, it’s work. I don’t think about it, Thank you so much Richard.
Hello Robby,
Excellent. Happy to hear it. I hope you find the part useful.
-Richard
Hi there! Thanks very much for creating these. I’ve still to get my head full around the parts editor and the LC Studio SD card module was exactly what I was looking for!
Hello Tony,
Thank you for your kind comment. I’m happy to hear you found the part you were looking for.
-Richard
Can you post the current link, the google one doesn’t work anymore.
Hello Michael,
Thank you for your comment. The parts are still available and the links are working for me. Can you try right-clicking on a link and saving the file?
-Richard
Very good art! Thx
Hello Martin,
Thank you for your comment. I hope you find the parts useful.
-Richard