Fritzing Parts – Sixth Set

This is the sixth set of Fritzing parts that I’ve made. The first set of parts, along with details about Fritzing and about part creation, can be found here. All sets can be found under the ‘fritzing’ tag here. As with the previous sets, these are generally parts that I’ve needed for my own projects.

The group of Fritzing parts.

The group of Fritzing parts.

 

The group of Fritzing parts, numbered.

The group of Fritzing parts, numbered.

The parts are as follows:

  1. Orange Pi One
  2. 16 RGB LED ring
  3. 12 RGB LED ring
  4. 8 RGB LED ring
  5. 1 RGD LED ring
  6. 7 RGB LED ring
  7. MAX471 Breakout Board
  8. TSL2561 Breakout Board
  9. HG7881 Breakout Board
  10. 8 Channel Power Relay

Since the Fritzing parts repository (code.google.com/p/fritzing/issues/detail?id=2753) is no longer available for sharing parts, they will be posted here instead.   If you’d like to make a request for the next set, please leave the following details in the comment section below:

  1. The name of the board/module
  2. The outside dimensions in millimeters
  3. Details about each pin (i.e. name — e.g. VCC, GND, SDA)
  4. An image of it at a reasonable resolution (and as close to parallel to the image plane as possible)
facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

31 Responses

  1. MohammadMubin December 31, 2016 / 2:32 pm

    How to download

  2. MohammadMubin December 31, 2016 / 2:39 pm

    Hi,I am making a project using Orange Pi but can you kindly release the download of this set

    • Richard January 2, 2017 / 7:56 am

      Hello Mohammad Mubin,

      Thank you for your comment. The part is not yet complete (just the breadboard view is done at the moment). I am in the process of finishing the other two layers. I will reply to your comment again once the part is complete and a link has been added to the above post.

      -Richard

      • MohmamdMubin January 20, 2017 / 6:26 am

        Thank you 🙂

  3. Ali January 1, 2017 / 8:57 pm

    Hi,

    I need please orange pi .fzpz that you marked as number 1 in the previous parts

    Best Regards,

  4. ali January 1, 2017 / 9:05 pm

    Hi

    Orange pi.fzpz please

  5. ali January 1, 2017 / 9:06 pm

    need orange pi

  6. ali January 1, 2017 / 9:07 pm

    Hi,

    Please i need orange pi .fzpz

    Thanks

    • Richard January 2, 2017 / 7:57 am

      Hello Ali,

      Thank you for your comment. The part is not yet complete (just the breadboard view is done at the moment). I am in the process of finishing the other two layers. I will reply to your comment again once the part is complete and a link has been added to the above post.

      -Richard

  7. Chinmay January 4, 2017 / 9:41 pm

    Hi Richard,

    Thank you for designing so many fritzing parts. I am using your images in a science fair project that I am doing. I have found most of all what I need from your images. I just need the 8 channel relay image. Could you please let me know when it is done.

    Thanks

    • Richard January 8, 2017 / 9:21 am

      Hello Chinmay,

      The post has been updated with a link to the requested part. Please let me know if you have any problems with it.

      -Richard

      • Chinmay February 3, 2017 / 10:36 pm

        Thank you Richard.

        • Richard February 3, 2017 / 11:03 pm

          Hello Chinmay,

          No problem. I hope you find the part useful.

          -Richard

  8. Matt February 2, 2017 / 3:01 pm

    Thank you so much for releasing the 8 channel Relay. I was looking for something similar from another user but his did not work on the schematic view. Yours WORKS PERFECT!!

    • Richard February 3, 2017 / 7:37 am

      Hello Matt,

      Thank you for your kind comment. I am happy to hear that you like the part and that it is useful to you.

      -Richard

    • Richard February 6, 2017 / 6:56 am

      Hello Eric,

      Thank you for your comment. I am in the midst of finishing the Orange Pi part. I will respond to your comment again to notify you once it is posted here.

      -Richard

    • Richard January 24, 2018 / 11:50 pm

      Hello Thierry,

      Thank you for your comment. I added both to the list of parts to be made in the next set.

      -Richard

  9. Gianluca June 3, 2017 / 9:43 pm

    Hello Richard,
    thank you for your excellent job.
    I need the MAX471 Breakout Board. How can i do for downloading it?
    Thanks in advance.

    • Richard January 26, 2018 / 1:02 am

      Hello Gianluca,

      The post has been updated with a link to that part. Please let me know if you have any problems with it.

      -Richard

  10. Simone June 14, 2017 / 7:48 pm

    hello, i need the sensor max471.
    It’s possible to get it?
    Thanks

    • Richard January 26, 2018 / 1:02 am

      Hello Simone,

      The post has been updated with a link to that part. Please let me know if you have any problems with it.

      -Richard

  11. jxmot July 26, 2017 / 5:34 pm

    Hello Richard,

    Nice collection of parts!

    By any chance would the Tessel 2 and perhaps the ESP8266(Amica, NodeMCU) be added in the future?

    Thanks!

    • Richard January 24, 2018 / 11:40 pm

      Hello jxmot,

      Thank you for your comment. I added the Tessel 2 to the list of parts to be made in the next set. It appears that someone else has already made the ESP8266.

      -Richard

  12. robot lee July 29, 2017 / 9:56 pm

    HG7881 Breakout Board(Fritzing Parts – Sixth Set)

    • Richard February 3, 2018 / 6:15 am

      Hello robot lee,

      The post has been updated with a link to that part. Please let me know if you have any problems with it.

      -Richard

  13. Mario August 8, 2017 / 6:38 am

    Hi, I need max471, please

    • Richard January 26, 2018 / 1:02 am

      Hello Mario,

      The post has been updated with a link to that part. Please let me know if you have any problems with it.

      -Richard

  14. KingDarBoja March 13, 2018 / 10:07 pm

    Hello Richard,

    Those are good looking fritzing parts, should be good if you upload them on fritzing forums or follow the steps to share on the official github repository: https://github.com/fritzing/fritzing-parts

    • Richard April 16, 2018 / 5:25 am

      Hello KingDarBoja,

      Thank you for your comment. Sharing the parts via the Fritzing forum is certainly something that I will try again, along with sharing via GitHub.

      -Richard

Leave a Reply

Your email address will not be published. Required fields are marked *